View source for .30-06 Springfield

{{short description|American military rifle cartridge}}
{{redirect|30.06|the "30.06 sign" in Texas gun law|Gun laws in Texas#30.06 signage|similar names|3006 (disambiguation){{!}}3006}}
{{Use mdy dates|date=July 2024}} {{Use American English|date=July 2024}}
{{Infobox firearm cartridge
| name               = .30-06 Springfield
| image              = 30-06 Springfield rifle cartridge.jpg
| image_size         = 300px
| caption            = .30-06 Springfield cartridge with soft tip bullet
| origin             = United States
| type               = Rifle
<!-- Service history -->
| service            = {{ubli|1906 – late 1970s (United States Armed Forces)|1906–present}}
| used_by            = United States and other nations
| wars               = {{ubl|[[World War I]]|[[World War II]]|[[Korean War]]|[[Vietnam War]]}}

<!-- Production info -->
| designer           = [[Springfield Armory]]
| design_date        = 1906
| manufacturer       = Springfield Armory, Lake City Arsenal, others
| production_date    = 1906–present
| number             = 
| variants           =

<!-- Specifications -->
| is_SI_specs        = no
| parent             = [[.30-03|.30-03 Springfield]]
| case_type          = Rimless, straight walled, bottleneck
| bullet             = .308 in (7.82 mm)<ref>[https://saami.org/wp-content/uploads/2019/02/ANSI-SAAMI-Z299.4-CFR-Approved-2015-12-14-Posting-Copy.pdf SAAMI Reference], p. 95</ref>
| land               = .300
| neck               = .340
| shoulder           = .441
| base               = .471
| rim_dia            = .473
| rim_thick          = .049
| case_length        = 2.494
| length             = 3.34
| case_capacity      = 68
| rifling            = 1 in {{convert|10|in|mm|abbr=on}}
| primer             = Large rifle
| max_pressure       = 58740
| pressure_method    = C.I.P.
| max_pressure2      = 60000
| pressure_method2   = SAAMI
| max_cup            = 50,000<ref>{{Cite web |date=2007-09-28 |title=SAAMI pressure specs |url=http://www.handloads.com/misc/saami.htm |access-date=2023-02-11 |archive-url=https://web.archive.org/web/20070928121135/http://www.handloads.com/misc/saami.htm |archive-date=2007-09-28}}</ref>
<!-- Ballistic performance -->
| is_SI_ballistics   = no
| Muzzle velocity    = 
| Muzzle energy      =

<!-- Ballistic data, load 1 -->
| bw1                = 150
| btype1             = Nosler Ballistic Tip
| vel1               = 2910
| en1                = 2820

<!-- Ballistic data, load 2 -->
| bw2                = 165
| btype2             = BTSP
| vel2               = 2800
| en2                = 2872

<!-- Ballistic data, load 3 -->
| bw3                = 180
| btype3             = Core-Lokt Soft Point
| vel3               = 2700
| en3                = 2913

<!-- Ballistic data, load 4 -->
| bw4                = 200
| btype4             = Partition
| vel4               = 2569
| en4                = 2932

<!-- Ballistic data, load 5 -->
| bw5                = 220
| btype5             = RN
| vel5               = 2500
| en5                = 3036

<!-- Ballistics data source -->
| test_barrel_length = 24 inch (61 cm)
| balsrc             = Federal Cartridge<ref name="federal">{{cite web |url=http://www.federalcartridge.com/ballistics/ |title=Federal Cartridge Co. ballistics page |access-date=2007-09-21 |archive-url=https://web.archive.org/web/20070922160252/http://www.federalcartridge.com/ballistics/ |archive-date=22 September 2007<!--Added by DASHBot-->}}</ref> / Accurate Powder<ref name="accurate">{{cite web |url=http://www.accuratepowder.com/data/AccurateGuideV3-2.pdf |title=Accurate Powder reload data table |access-date=2009-02-09 |archive-url=https://web.archive.org/web/20090320043840/http://www.accuratepowder.com/data/AccurateGuideV3-2.pdf |archive-date=20 March 2009<!--Added by DASHBot-->}}</ref>
}}

The '''.30-06 Springfield''' [[cartridge (weaponry)|cartridge]] (pronounced "thirty-[[Names for the number 0 in English|aught]]-six" {{IPAc-en|ˈ|θ|ɝ|t|i|_|ɔ:|t|_|s|ɪ|k|s}}), '''7.62×63mm''' in metric notation, and called the '''.30 Gov't '06''' by Winchester,<ref>''Gun Digest Shooter's Guide to Rifles'' Wayne van Zwoll, p 186</ref> was introduced to the [[United States Army]] in 1906 and later [[standardization|standardized]]; it remained in military use until the late 1970s. In the cartridge's name, ".30" refers to the nominal [[caliber]] of the [[bullet]] in inches; "06" refers to the year the cartridge was adopted, 1906. It replaced the [[.30-03 Springfield]], [[6mm Lee Navy]], and [[.30-40 Krag]] cartridges. The .30-06 remained the U.S. Army's primary rifle and machine gun cartridge for nearly 50 years before being replaced by the [[7.62×51mm NATO]] and [[5.56×45mm NATO]], both of which remain in current U.S. and NATO service. The cartridge remains a very popular sporting round, with ammunition produced by all major manufacturers.

==History==
In the early-1890s, the U.S. military adopted the [[smokeless powder]] [[.30-40 Krag]] rimmed cartridge. The 1894 version of that cartridge used a {{convert|220|gr|adj=on}} round-nose bullet. Around 1901, the U.S. started developing an experimental rimless cartridge for a Mauser action with a box magazine. That led to the 1903 [[.30-03 Springfield]] rimless service round that used the same {{convert|220|gr|adj=on}} round-nose bullet as the Krag.<ref name="Sharpe591">{{cite book |last=Sharpe |first=Philip B. |title=The Rifle in America |date=1938 |publisher=William Morrow |quote=The rimless cartridge case first used a standard 220-grain Krag bullet, but in 1906 the government decided that high velocity was necessary and accordingly adopted the German form of pointed or spitzer bullet, reducing the weight to 150 grains closely approximating the 154-grain 8&nbsp;mm Mauser. |page=591}}</ref> The .30-03 achieved a muzzle velocity of {{convert|2300|ft/s|m/s|abbr=on}}.{{Citation needed|date=January 2021}}

Many European militaries at the beginning of the 20th century were adopting lighter-weight (roughly {{convert|150|to|200|gr|adj=on}}), higher velocity, service rounds with [[spitzer (bullet)|pointed (spitzer) bullets]]: France in 1898 ([[8×50mmR Lebel]] ''Balle D'' spitzer {{convert|198|gr|g}} with [[boat-tail bullet|boat-tail]]), Germany in 1903 ([[7.92×57mm Mauser]] {{convert|153|gr|g}} ''S Patrone''), Russia in 1908 ([[7.62×54mmR]] ''Lyokhkaya pulya'' [light bullet]), and Britain in 1910 ([[.303 British#Mark VII|.303 British Mark VII]] {{convert|174|gr|g}}).<ref>{{cite web |url=http://www.303british.com/id19.html |title=Cartridge Specifications and Chronology |access-date=26 October 2014}}</ref> Consequently, the round-nosed U.S. [[.30-03]] service cartridge was falling behind.<ref>{{cite web |url=http://www.m1-garand-rifle.com/30-06/ |title=The .30-06 Springfield Cartridge |work=The M1 Garand Rifle |access-date=26 October 2014}}</ref>

===Cartridge, ball, caliber .30, Model of 1906 (M1906)===
For these reasons, the U.S. military developed a new, lighter cartridge in 1906, the .30-06 Springfield, "cartridge, ball, caliber .30, Model of 1906", or just ''M1906''. The .30-03 case was modified to have a slightly shorter neck to fire a spitzer flat-based {{convert|150|gr|2|adj=on}} bullet that had a [[ballistic coefficient]] (G1 BC) of approximately 0.405, a muzzle velocity of {{convert|2700|ft/s|m/s|abbr=on}}, and a muzzle energy of {{Convert|2429|ftlbf|J|abbr=on}}. The cartridge was loaded with military rifle (MR) 21 propellant, and its maximum range was claimed (falsely) to be {{convert|4700|yd|m|-1|abbr=on}}.<ref>{{cite book |last=Hatcher |first=Julian S. |author-link=Julian Hatcher |date=1962 |title=Hatcher's Notebook |edition=3rd |publisher=Stackpole Company |location=Harrisburg, PA |lccn=62-12654 |page=19 |quote=The maximum range was given in the handbooks as 4700 yards.}}</ref> The [[M1903 Springfield rifle]], which had been introduced alongside the .30-03 cartridge, was modified to accept the new .30-06 Springfield cartridge. Modifications to the rifle included shortening the barrel at its breech and resizing the chamber, so that the more tapered bullet would not have to jump too far to reach the rifling. Other changes to the rifle included the elimination of the troublesome "rod bayonet" of the earlier Springfield rifles.{{Citation needed|date=January 2021}}

The M1906 maximum range was originally overstated. When the M1906 cartridge was developed, the range tests had been done to only {{convert|1800|yd|m|-1}}; distances beyond that were estimated, but the estimate for extreme range was incorrect by almost 40 percent.<ref>{{harvnb|Hatcher|1962|p=20}}<!-- Hatcher says 38 percent: 3400 yd actual * 1.38 = 4692 yd would match 4700 yd claim--></ref> The range discrepancy became evident during [[World War I]]. Before the widespread employment of light mortars and artillery, long-range machine gun "barrage" or [[indirect fire]]s were considered important in U.S. infantry tactics.<ref>{{cite book |last=George |first=John |title=Shots Fired in Anger |publisher=NRA Press |date=1981 |pages=402–403}}</ref> When the U.S. entered World War I, it did not have many machine guns, so it acquired British and French machine guns. When those weapons were later replaced with U.S. machine guns firing the M1906 round, the effective range of the barrage was 50 percent less.<ref>{{harvnb|Hatcher|1962|pp=21&ndash;23}}</ref> Firing tests performed around 1918 at Borden Brook Reservoir (Massachusetts), Miami, and Daytona Beach showed the actual maximum range of the M1906 cartridge to be {{convert|3300|to|3400|yd|m|-1}}.<ref>{{harvnb|Hatcher|1962|pp=19&ndash;20}}</ref> Germany, which was using the ''S Patrone'' (S ball cartridge) loaded with a similar {{convert|153|gr|g|adj=on}} flat-based bullet in its rifles, had apparently confronted and solved the same problem by developing an aerodynamically more refined bullet for long-range machine gun use. The ''s.S. Patrone'' was introduced in 1914 and used a {{convert|197.5|gr|g|2|adj=on}} ''s.S. – schweres Spitzgeschoß'' (heavy spitzer) boat-tail bullet which had a maximum range of approximately {{convert|5000|m|yd|0|abbr=on}}.<ref name="S and s.S. Patrone ballistics 2">{{Cite web |url=http://pdf.textfiles.com/manuals/FIREARMS/fn_fn98.pdf |title=FN Mauser Model 98 rifle and carbine operator's manual}}</ref>

===.30 M1 ball cartridge===
For these reasons, in 1926, the ordnance corps, after extensive testing of [[7.5×55mm Swiss#The GP 11 cartridge|7.5×55mm Swiss GP11]] projectiles provided by the Swiss, developed the .30 M1 ball cartridge loaded with a new [[Improved military rifle powder|improved military rifle (IMR) 1185]] propellant and {{convert|174|gr|2|adj=on}} bullet with a 9° boat-tail and an [[ogive]] of 7 [[Calibre length|calibers]] [[nose cone design|nose cone]] that had a higher [[ballistic coefficient]] of roughly 0.494 (G1 BC),<ref>{{cite web |url=https://www.snipercentral.com/m118.phtml |title=M118 History - Sniper Central |access-date=26 October 2014}}</ref><ref>{{cite web |url=http://www.cruffler.com/trivia-July99.html |title=Firearm Technical Trivia, July 1999 |first=Adam C. |last=Firestone |website=www.cruffler.com}}</ref> that achieved a muzzle velocity of {{convert|2647|ft/s|m/s|abbr=on}} and muzzle energy of {{Convert|2675|ftlbf|J|abbr=on}}.<ref name="Hatcher 1962 29">{{harvnb|Hatcher|1962|p=29}}</ref> This bullet further reduced [[air resistance]] in flight, resulting in less rapid downrange deceleration, less lateral drift caused by crosswinds, and significantly greater supersonic and maximum effective range from machine guns and rifles alike.<ref name="cgsc.edu">[http://www.cgsc.edu/carl/docrepository/FM23_10.pdf FM 23-10 ''Basic Field Manual: U.S. Rifle Caliber .30, M1903'', 20 September 1943 page 212] {{webarchive |url=https://web.archive.org/web/20130418083932/http://www.cgsc.edu/carl/docrepository/FM23_10.pdf |date=April 18, 2013 }}</ref> Additionally, a [[gilding metal]] jacket was developed that all but eliminated the metal fouling that plagued the earlier M1906 cartridge.
The loaded round weighed {{convert|420|gr}} and its maximum range was approximately {{convert|5500|yd|m|-1|abbr=on}}.<ref name="cgsc.edu"/> The maximum average pressure (MAP) was {{convert|48000|psi|MPa|2|abbr=on}}. The average target radius was specified to be not greater than {{convert|4.5|in|cm|0|abbr=on}} at {{convert|500|yd|m|0|abbr=on}} and not greater than {{convert|5.5|in|cm|0|abbr=on}} at {{convert|600|yd|m|0|abbr=on}} when fired from a Mann accuracy weapon.<ref name="auto">{{Cite web |url=https://books.google.com/books?id=msoIAQAAIAAJ&q=m2+link+.50&pg=PA9 |title=Technical Manual Small-Arms Ammunition, TM9-1990, U.S. War Department |access-date=20 February 2020 |date=23 May 1942}}</ref><ref>{{Cite web |url=http://www.odcmp.org/1001/mann_inc.asp |title=The CMP Mann Accuracy Devices |last1=Rutledge |first1=Steven T. |date=2001-07-27 |access-date=2023-02-11 |website=odcmp.org}}</ref>

===Cartridge, caliber .30, ball, M2===
Wartime surplus totaled over two billion rounds of ammunition. Army regulations called for training use of the oldest ammunition first. As a result, the older .30-06 ammunition was expended for training; stocks of .30 M1 ball ammunition were allowed to slowly grow until all of the older M1906 ammunition had been fired. By 1936, it was discovered that the maximum range of the .30 M1 ball ammunition with its boat-tailed spitzer bullets was beyond the safety limitations of many military firing ranges. An emergency order was made to manufacture quantities of ammunition that matched the external ballistics of the earlier M1906 cartridge as soon as possible. A new cartridge was developed in 1938 that was essentially a duplicate of the old M1906 round, but loaded with [[Improved military rifle powder#IMR #4895|IMR 4895]] propellant and a new flat-based bullet that had a gilding metal jacket and a different lead alloy, and weighed {{convert|152|gr|2}} instead of {{convert|150|gr|2}}. This 1938 pattern cartridge, the cartridge, caliber .30, ball, M2, achieved a muzzle velocity of {{convert|2805|ft/s|m/s|abbr=on}} and muzzle energy of {{Convert|2656|ftlbf|J|abbr=on}}.<ref name="Hatcher 1962 29"/> The loaded round weighed {{convert|416|gr}} and its maximum range was approximately {{convert|3450|yd|m|-1|abbr=on}}.<ref name="cgsc.edu"/> The MAP was {{convert|50000|psi|MPa|2|abbr=on}} by copper crusher (equivalent to the SAAMI CUP unit). The average target radius was specified to be not greater than {{convert|6.5|in|cm|1|abbr=on}} at {{convert|500|yd|m|0|abbr=on}} and not greater than {{convert|7.5|in|cm|1|abbr=on}} at {{convert|600|yd|m|0|abbr=on}}.<ref name="auto"/>

==Firearms==
[[File:Batesgarand2.jpg|thumb|[[M1 Garand]] 30-06. Note the ammunition clip at 12 o'clock. It is ejected from the rifle after all eight rounds have been fired.]]
[[File:Super2012.jpg|thumb|A [[Winchester Model 70]] Super Grade hunting rifle in .30-06 with [[Leupold & Stevens|Leupold]] 6×42 scope]]

In military service, the .30-06 was used in the [[bolt-action]] [[M1903 Springfield]] rifle, the bolt-action [[M1917 Enfield]] rifle, the [[semi-automatic firearm|semi-automatic]] [[M1 Garand]] rifle, the semi-automatic [[M1941 Johnson rifle]], the Famage Mauser, the [[M1918 Browning Automatic Rifle|Browning Automatic Rifle]] (BAR), and numerous machine guns, including the [[M1917 Browning machine gun|M1917]] and [[M1919 Browning machine gun|M1919]] series. It served the United States in both World Wars and in the [[Korean War]], and its last major use was during the [[Vietnam War]].{{Citation needed|date=January 2021}}

The Belgian army (ABL) bought the [[FN Model 1949]] rifle in .30-06 caliber (both as a sniper version with telescopic sights and as a general service weapon). The Belgian armed forces used the round widely in the Korean war, where the .30-06 caliber FN-49 proved to be a superior weapon in terms of both accuracy and reliability to the American [[M1 Garand]]. The .30-06 FN-49 saw widespread use in the various wars in and around the [[Belgian Congo]]. The 30-06 FN-49 was also sold to the armies of Luxembourg, Indonesia, and Colombia. Another customer was Brazil where it served the navy.{{Citation needed|date=January 2021}}

Large volumes of surplus [[firearm brass|brass]] made it the basis for dozens of commercial and [[.30-06 Springfield Wildcat Cartridges|wildcat]] cartridges, as well as being extensively used for [[handloading|reloading]]. In 1908 the [[Winchester Model 1895|Model 1895 Winchester]] lever-action rifle became the first commercially-produced sporting rifle chambered in .30-06 Springfield. It is still a very common round for hunting and is suitable for large game such as bison, [[Sambar deer]], and bear, when used at close to medium ranges.{{Citation needed|date=January 2021}}

In 1903, the Army converted its M1900 [[Gatling gun]]s in [[.30 Army]] to fit the new [[.30-03]] cartridge as the M1903. The later M1903-'06 was an M1903 converted to .30-06. This conversion was principally carried out at the Army's Springfield Armory arsenal repair shops. All models of Gatling guns were declared obsolete by the U.S. Army in 1911, after 45 years of service.<ref>Paul Wahl and Don Toppel, ''The Gatling Gun'', Arco Publishing, 1971, p. 155.</ref>

With "hot" [[handloading|handloads]] and a [[rifle]] capable of handling them, the .30-06 is capable of performance rivaling many magnum cartridges. However, when loaded more closely to the original government specs, .30-06 remains within the upper limit of felt recoil most shooters consider tolerable over multiple rounds, unlike the magnums, and is not unnecessarily destructive of meat on game such as deer. With appropriate loads, it is suitable for any small or large heavy game found in [[North America]]. The .30-06's power and versatility (combined with the availability of surplus [[firearms]] chambered for it and demand for commercial [[ammunition]]) have kept the round as one of the most popular for hunting in North America.{{Citation needed|date=January 2021}}

==Performance==
The .30-06 cartridge was designed when shots of {{convert|1,000|yd|m|sigfig=4}} were expected. In 1906, the original M1906 .30-06 cartridge consisted of a {{convert|150|gr|g}}, flat-base [[cupronickel]]-jacketed-bullet. After World War I, the U.S. military needed better long-range performance machine guns. Based on weapons performance reports from Europe, a streamlined, {{convert|173|gr|1}} boattail, [[gilding metal|gilding-metal]] bullet was used. The .30-06 cartridge, with the {{convert|173|gr|1}} bullet was called ''cartridge, .30, M1 ball''. The .30-06 cartridge was far more powerful than the smaller Japanese [[6.5×50mm Arisaka]] cartridge and comparable to the Japanese [[7.7×58mm Arisaka]]. The new M1 ammunition proved to be significantly more accurate than the M1906 round.<ref name="multiref1">Dunlap, Roy, ''Ordnance Went Up Front'', Samworth Press (1948), p. 303 {{ISBN|978-1-884849-09-1}}</ref>

<!-- More grain/gram swaps needed. Hatcher has data, but not avail now. -->
In 1938, the unstained, {{convert|150|gr|g}}, flat-base bullet combined with the .30-06 case became the M2 ball cartridge. The M2 ball specifications required {{convert|2740|ft/s|sigfig=4}} minimum velocity, measured {{convert|78|ft|m|sp=us}} from the muzzle.<ref>{{Citation |title=Army Ammunition Data Sheets: Small Caliber Ammunition |date=April 1994 |author=U.S. Army |series=Technical Manual |id=TM 43-0001-27 |url=http://www.dtic.mil/dticasd/sbir/sbir032/a044a.pdf |archive-url=https://web.archive.org/web/20071202134237/http://www.dtic.mil/dticasd/sbir/sbir032/a044a.pdf |url-status=dead |archive-date=December 2, 2007 <!-- also http://www.kmike.com/Ammo/tm%2043-0001-27.pdf-->}}, page 5-9</ref> M2 ball was the standard-issue ammunition for military rifles and machine guns until it was replaced by the 7.62×51mm NATO round in 1954. For rifle use, M2 ball ammunition proved to be less accurate than the earlier M1 cartridge; even with match rifles, a target group of {{convert|5|in|mm}} diameter at {{convert|200|yd|m}} using the {{convert|150|gr|adj=on}} M2 bullet was considered optimal, and many rifles did not perform nearly as well.<ref name="multiref1"/> The [[U.S. Marine Corps]] retained stocks of M1 ammunition for use by snipers and trained marksmen throughout the [[Solomon Islands campaign]] in the early years of the war.<ref>{{harvnb|George|1981|p=409}}</ref>

In an effort to increase accuracy, some snipers resorted to use of the heavier .30-06 M2 armor-piercing round, a practice that re-emerged during the [[Korean War]]. Others sought out lots of M2 ammunition produced by [[Denver Federal Center|Denver Ordnance]], which had proved to be more accurate than those produced by other wartime ammunition plants when used for sniping at long range.<ref>{{harvnb|George|1981|pp=81, 428, 434–435}}</ref> With regards to penetration, the M2 AP round<ref>{{cite web |last1=Cooke |first1=Gary W. |title=.30 Caliber (.30-06 Springfield) Ammunition |url=https://www.inetres.com/gp/military/infantry/rifle/30_ammo.html |website=inetres.com}}</ref> can penetrate at least {{convert|0.42|in|mm|2|abbr=on}} of armor steel at {{convert|100|yd|m}}. A test done by Brass Fetchers shows that M2 AP can actually penetrate up to {{convert|0.5|in|mm|2|abbr=on}} of MIL-A-12560 armor steel from a distance of {{convert|100|yd|m}}. The round struck the plate at a velocity of 2,601 fps and made a complete penetration.<ref>{{cite AV media |url=https://www.youtube.com/watch?v=IkVMSj6scxE |title=Armor Plate Shootout - 0.5" thick MIL-A-12560 armor plate |date=31 January 2013 |via=YouTube}}</ref>

[[File:30-06 Spring.PNG|thumb|right|180px|Winchester .30-06 cartridge]]
[[File:9.3X62-30-06-8X57-6.5X55-308.JPG|180px|thumb|From left to right [[9.3×62mm]], ''.30-06 Springfield'', [[7.92×57mm Mauser]], [[6.5×55mm]] and [[.308 Winchester]]]]
[[File:Garand clip.jpg|thumb|180px|Eight .30-06 cartridges loaded in an ''en bloc'' clip for the [[M1 Garand]]]]

Commercially manufactured rifles chambered in .30-06 are popular for hunting. Current .30-06 factory ammunition varies in bullet weight from 7.1 to 14.3 grams (110 to 220 grains) in solid bullets, and as low as 3.6 grams (55 grains) with the use of a sub-caliber bullet in a [[Sabot (firearms)|sabot]].<ref>{{Cite web |last=Nelson |first=Terry |date=August 2018 |title=The .30-06 Can Do It All |url=https://www.outdoorhub.com/stories/2018/08/07/the-30-06-can-do-it-all/ |website=Outdoor Hub}}</ref> Loads are available with reduced velocity and pressure as well as increased velocity and pressure for stronger firearms. The .30-06 remains one of the most popular sporting cartridges in the world. Many hunting loads have over {{convert|3000|ftlb}} of energy at the muzzle and use expanding bullets that can deliver rapid energy transfer to targets.{{Citation needed|date=January 2021}}

{| class="wikitable" style="margin: 1em auto;"
|-
! Bullet weight
! Federal<ref>{{cite web |url=http://www.federalpremium.com/products/rifle.aspx |title=Federal Premium Ammunition - Rifle |website=www.federalpremium.com |language=en |access-date=2017-12-18}}</ref>
! Hodgdon<ref>Hodgdon Powder Company, Cartridge Load Recipe Report, 3/27/2010, data.hodgdon.com</ref>
! Speer<ref>Speer Reloading Manual Number 12, 1994, Blount, Inc., Lewiston, ID. pp. 286-294.</ref>
! Hornady<ref>Hornady Handbook of Cartridge Reloading, Fourth Edition, 1991, Hornady Manufacturing Company, Grand Island, NE. pp. 343-350.</ref>
! Nosler<ref>Nosler Reloading Guide Number Four, 1996, Nosler, Inc., Bend OR. pp. 322-329.</ref>
! Barnes<ref>Barnes Reloading Manual Number 2-Rifle Data, 1997, Barnes Bullets, Inc., American Fork, UT. pp. 381-386.</ref>
|-
| {{convert|110|gr|1|abbr=on|}}
| N/A
| {{convert|3505|ft/s|abbr=on|sigfig=4}}
| {{convert|3356|ft/s|abbr=on|sigfig=4}}
| {{convert|3500|ft/s|abbr=on|sigfig=4}} 
| N/A
| {{convert|3471|ft/s|abbr=on|sigfig=4}}
|-
| {{convert|125|-|130|gr|1|abbr=on}}
| {{convert|3140|ft/s|abbr=on|sigfig=4}}
| {{convert|3334|ft/s|abbr=on|sigfig=4}}
| {{convert|3129|ft/s|abbr=on|sigfig=4}}
| {{convert|3200|ft/s|abbr=on|sigfig=4}}
| {{convert|3258|ft/s|abbr=on|sigfig=4}}
| {{convert|3278|ft/s|abbr=on|sigfig=4}}
|-
| {{convert|150|gr|1|abbr=on}}
| {{convert|2910|ft/s|abbr=on|sigfig=4}} 
| {{convert|3068|ft/s|abbr=on|sigfig=4}}
| {{convert|2847|ft/s|abbr=on|sigfig=4}} 
| {{convert|3100|ft/s|abbr=on|sigfig=4}}
| {{convert|3000|ft/s|abbr=on|sigfig=4}}
| {{convert|3031|ft/s|abbr=on|sigfig=4}}
|-
| {{convert|165|gr|1|abbr=on}}
| {{convert|2800|ft/s|abbr=on|sigfig=4}}
| {{convert|2938|ft/s|abbr=on|sigfig=4}}
| {{convert|2803|ft/s|abbr=on|sigfig=4}}
| {{convert|3015|ft/s|abbr=on|sigfig=4}}
| {{convert|3002|ft/s|abbr=on|sigfig=4}}
| {{convert|2980|ft/s|abbr=on|sigfig=4}}
|-
| {{convert|180|gr|1|abbr=on}}
| {{convert|2700|ft/s|abbr=on|sigfig=4}}
| {{convert|2798|ft/s|abbr=on|sigfig=4}}
| {{convert|2756|ft/s|abbr=on|sigfig=4}} 
| {{convert|2900|ft/s|abbr=on|sigfig=4}}
| {{convert|2782|ft/s|abbr=on|sigfig=4}}
| {{convert|2799|ft/s|abbr=on|sigfig=4}}
|-
| {{convert|200|gr|1|abbr=on}}
| N/A
| {{convert|2579|ft/s|abbr=on|sigfig=4}} 
| {{convert|2554|ft/s|abbr=on|sigfig=4}} 
| N/A
| {{convert|2688|ft/s|abbr=on|sigfig=4}}
| {{convert|2680|ft/s|abbr=on|sigfig=4}}
|-
| {{convert|220|gr|1|abbr=on}}
| {{convert|2400|ft/s|abbr=on|sigfig=4}}
| {{convert|2476|ft/s|abbr=on|sigfig=4}} 
| N/A 
| {{convert|2500|ft/s|abbr=on|sigfig=4}}
| {{convert|2602|ft/s|abbr=on|sigfig=4}}
| {{convert|2415|ft/s|abbr=on|sigfig=4}}
|}

The table above shows typical muzzle velocities available in commercial 30-06 loads along with the maximum .30-06 muzzle velocities reported by several reloading manuals for common bullet weights. Hodgdon, Nosler, and Barnes report velocities for {{convert|24|in}} barrels. Hornady and Speer report velocities for {{convert|22|in}} barrels. The data are all for barrels with a twist rate of 1 turn in {{convert|10|in}} which is needed to stabilize the heaviest bullets. The higher muzzle velocities reported by Nosler for {{convert|165|gr|1}} and heavier bullets use loads employing a slow-burning, double-base powder (Alliant Reloder 22).{{Citation needed|date=January 2021}}

The newer [[7.62×51mm NATO|7.62×51mm NATO/.308 Winchester]] cartridge offers similar performance to standard military .30-06 loadings in a smaller cartridge.

==Recoil==
One reason that the .30-06 has remained a popular round for so long is that the cartridge is at the upper limit of power that is tolerable to most shooters.<ref>Barnes, Frank C., ''Cartridges of the World (Kindle Edition)'', 2009, Frank C. Barnes and Krause Publications, Chapter 2, Location 375</ref><ref>{{cite web |url=http://www.gunnersden.com/index.htm.30-06springfield.html |title=30-06 Springfield |author=Kim Lockhart |access-date=26 October 2014 |archive-url=https://web.archive.org/web/20130424071013/http://gunnersden.com/index.htm.30-06springfield.html |archive-date=2013-04-24 |url-status=dead}}</ref> Recoil energy ([[free recoil]]) greater than {{convert|20|ftlbf}} will cause most shooters to develop a serious flinch, and the recoil energy of an {{convert|8|lb|adj=on}} rifle firing a {{convert|165|gr|adj=on|1}} 30-06 bullet at {{convert|2900|ft/s}} is {{convert|20.1|ftlbf|1}}. Recoil-shy shooters can opt for lighter bullets, such as a {{convert|150|gr|adj=on|1}} bullet. In the same {{convert|8|lb|adj=on}} rifle, a {{convert|150|gr|adj=on|1}} bullet at {{convert|2910|ft/s}} will only generate {{convert|17.6|ftlbf|1}} of recoil energy.<ref>{{cite web |url=http://www.chuckhawks.com/recoil_table.htm |title=Rifle Recoil Table |access-date=26 October 2014}}</ref> Young shooters can start out with even lighter bullets weighing {{convert|110|,|125|, or|130|gr|1}}.{{Citation needed|date=January 2021}}

==Cartridge dimensions==
[[File:Cartridge 30-06.png|thumb|300 px|.30-06 Springfield cartridge dimensions. All sizes in inches]]

The .30-06 Springfield cartridge case can hold 68.2 grains and has a volume of {{convert|4.42|ml|in3}}. The exterior shape of the case was designed to promote reliable case feeding and extraction in [[bolt-action]] rifles and [[machine gun]]s alike, under extreme conditions.{{Citation needed|date=January 2021}}

[[File:.30-06 Springfield.svg|400px]]

'''.30-06 Springfield maximum C.I.P. cartridge dimensions.''' All sizes in millimeters.<ref>{{Cite web |url=http://www.cip-bobp.org/homologation/uploads/tdcc/tab-i/tabical-en-page111.pdf |title=C.I.P. TDCC datasheet .30-06 Spring.}}</ref>

Americans define the shoulder angle at alpha/2 = 17.5 degrees. According to the ''[[Commission Internationale Permanente pour l'Epreuve des Armes à Feu Portatives]]'' (C.I.P.) the common [[rifling]] [[twist rate]] for this cartridge is 254&nbsp;mm (1 in 10 in), 4 grooves, Ø lands = 7.62&nbsp;mm (.30 in), Ø grooves = 7.82&nbsp;mm (.308 in), land width = 4.49&nbsp;mm (.1768 in) and the [[Percussion cap|primer type]] is large rifle.{{Citation needed|date=January 2021}}

According to the official C.I.P. guidelines, the .30-06 Springfield case can handle up to 405 MPa (58,740 psi) piezo pressure. In C.I.P.-regulated countries, every rifle cartridge combination has to be [[Proof (firearms)|proofed]] at 125% of this maximum C.I.P. pressure to certify for sale to consumers. The [[8×64mm S]] is the closest European ballistic twin of the .30-06 Springfield.{{Citation needed|date=January 2021}}

== Sporting use ==
Although the .30-06 was designed as a military round, it soon caught the attention of big game hunters in the United States. This new cartridge offered a flatter trajectory and carried more energy than the popular [[.30-30 Winchester]]. The .30-06 also could be loaded with the then new [[Spitzer (bullet)|spitzer]] designed projectiles, which also contributed to extending the cartridge's performance with respect to other .30 caliber bullets fired from lever action rifles, making it easier to put venison on the table.

It is a very versatile round that may be loaded with bullets ranging from 110 to 220 grains, which may be effectively stabilized from 1:10" twist barrels. Thus, the cartridge may be used to hunt animals of different sizes from varmint to [[moose]] and even [[brown bear]]s with adequately constructed heavy bullets.<ref>{{Cite web |last=Petzal |first=David |date=June 21, 2021 |title=Why You Can't Go Wrong with the .30/06 |url=https://www.fieldandstream.com/story/blogs/gun-nut/still-cant-go-wrong-with-30-06-ammo/}}</ref> Since the cartridge may be used for taking all North American big game species it was considered an all-round by hunters and gun writers as [[Jack O'Connor (writer)|Jack O'Connor]], who hunted extensively with it.<ref>{{Cite web |last=Von Benedikt |first=Aram |date=January 11, 2021 |title=.30-06 Springfield: Is it Still the Best All-Around Big-Game Hunting Cartridge? |url=https://www.americanhunter.org/content/30-06-springfield-is-it-still-the-best-all-around-big-game-hunting-cartridge/}}</ref><ref>{{Cite web |last=Boddington |first=Craig |title=THE .270 VS. THE .30-06 |url=https://sportsafield.com/2017/the-270-vs-the-30-06/}}</ref>

President [[Theodore Roosevelt]] took a .30-06 to his famous African Safari along with his son [[Kermit Roosevelt|Kermit]] and [[Frederick Selous|Frederick Courteney Selous]], proving that the .30-06 could bring down game of any size. Though not optimal for dangerous game, the .30-06 is adequate for hunting African plains game.<ref>{{Cite web |last=Boddington |first=Craig |title=.30-06 Springfield -- Still America's Best? |date=13 August 2021 |url=https://www.boone-crockett.org/30-06-springfield-still-americas-best}}</ref>

With 150-grain bullets, the .30-06 Springfield is a perfect option for medium-sized game such as [[White-tailed deer|deer]] and [[Dall sheep|sheep]]. Leaving the muzzle at 2950 fps, it gives the hunter a maximum point blank range slightly short of 300 yards. The 165 and 168-grain bullets with higher ballistic coefficient contribute to buck cross winds more efficiently and maintain downrange energy at expense of a more curved trajectory, while loaded with 180 to 220 grains, the .30-06 is adequate for hunting larger game such as elk, moose, and even brown bears.

The .30-06 is also the parent case for many other popular hunting cartridges such as the venerable .[[.270 Winchester|270 Winchester]], the [[.25-06 Remington]], the [[.280 Remington]], and the .280 Ackley Improved. All of them are balanced, flat-shooting cartridges ranking high among the most popular big game hunting cartridge for mid-sized species worldwide.

Despite the new trend towards high ballistic coefficient cartridges, designed to be used with short length actions, hunters still praise the .30-06 as it still lists high on the rank of big game hunting cartridges popularity, and every major gun maker worldwide chambers it in at least one of its rifles.<ref>{{Cite web |last=Boddington |first=Craig |title=DON'T OVERLOOK THE .30-06 |url=https://sportsafield.com/2019/dont-overlook-the-30-06/}}</ref>

== Military cartridge types ==
{{More citations needed section|date=January 2021}}
''Note:'' .30-06 cartridges are produced commercially with many different bullets and to a number of different specifications.

=== United States ===
The .30-06 round was replaced by the 7.62×51mm NATO round in 1954. However, it remained in limited use in the army reserves and national guard for some time; [[Frankford Arsenal]] only stopped production in 1961, and [[Lake City Army Ammunition Plant]] was making .30-06 until the late 1970s, with new production batches in 1993 and 2002. 
The "T" (Trials) designation is the code number it had when it was under development and testing. The "M" (Model) designation is the number it received when it was made standard-issue. Issued bullets before 1934 used the year of adoption as their model number.   
 
[[File:Five301906govtBullets.png|thumb|right| The five most common bullets used in United States military loadings from left to right: M1903 bullet, M1906 ball, M1 ball, M2 ball, and M2 armor-piercing (AP) bullet. Black paint has chipped off the tip of AP bullet during rough handling. The [[cannelure]] indentation around each bullet is where the leading edge of the case would be [[Crimp (joining)|crimped]] into the bullet.
The four spitzer bullets used in the .30-06 Springfield cartridge case were loaded with a nearly identical [[Nose cone design#Tangent ogive|tangent]] [[ogive]] exposed for reliable functioning in self-loading firearms, while the earlier M1903 bullet is positioned to illustrate the longer neck of the preceding [[.30-03]] cartridge.]]

* '''Armor-piercing, M1917''': The M1917 was the first service-issue armor-piercing rifle ammunition used by the US Army. It had a steel core in a lead envelope with a partial cupro-nickel jacket which had an exposed soft tip. The exposed tip was designed to aid in the envelope peeling away on impact to allow the core to strike the target. It had the unintended effect of making the thin lead envelope an expanding bullet. Since expanding bullets were seen as violating the [[Hague Conventions of 1899 and 1907#Hague Convention of 1899|Hague Convention]] it did not see service in World War I.
* '''Armor-piercing, M1918''': The M1918 was similar to the armor-piercing M1917 round except it had a smooth cannelure near the case-mouth and had a full-metal-jacketed bullet. It replaced the AP M1917 round in service.
* '''Armor-piercing, M1922''' (''1922–1934''): This was a redesigned armor-piercing round with a heavier steel core. It was the first armor-piercing round to have a black-painted bullet tip. 
* '''Armor-piercing, M1''' (''1934–1939''): This was a higher-velocity (3,180 fps) AP round that was under development throughout its service. It was replaced in 1939 by the AP M2, a redesign of the AP M1922.  
* '''Armor piercing, M2''' (''1939–1954''): This cartridge is used against lightly armored vehicles, protective shelters, and personnel, and can be identified by its black bullet tip. Bullet is flat base, weight 163–168 grains. Defense against the M2 projectile by name is one of the performance standards for [[Personal armor|Type IV body armor]].<ref name="NIJ">{{cite web |url=http://www.ncjrs.gov/pdffiles1/nij/223054.pdf |title=Ballistic Resistance of Body Armor NIJ Standard-0101.06 |work=NIJ Standards |publisher=[[United States Department of Justice]] |access-date=2008-11-13 |date=July 2008}}</ref>  
* '''Armor-piercing incendiary, T15/M14''' (''1943–?'') and '''M14A1''' (?-1954): This cartridge may be substituted for the M2 armor-piercing round and is normally employed against flammable targets. The tip of the M14 bullet is colored with a blue tip over a black ring. The M14A1 featured an improved core design and incendiary charge and had a silver-colored aluminum-painted tip.
* '''Ball, M1906''' (''1906–1925''): This cartridge is used against personnel and unarmored targets and can be identified by its silver-colored cupro-nickel alloy bullet jacket. The M1906 has a {{convert|150|gr|g|abbr=in|adj=on|order=flip}} projectile and flat base. Its jacket was found to quickly foul the bore.
* '''Ball, M1''' (''1925–1937''): The M1 has an {{convert|173|gr|g|abbr=in|adj=on|order=flip}}, 9-degree boat-tailed projectile designed for aerodynamic efficiency. Though it had a lower initial velocity, velocity and energy were greater at longer ranges due to its efficient shape. The harder bullet was made of seven parts lead to one part antimony. The jacket material was changed to gilding metal (an alloy of 95% copper and 5% zinc) to reduce fouling.
* '''Ball, M2''' (''1937–1954''): With a {{convert|150|gr|g|abbr=in|adj=on|order=flip}} bullet based on the profile of the M1906, this cartridge incorporated the gilding-metal jacket of the M1 projectile combined with a slightly heavier, pure-lead core. It had a higher muzzle velocity than either of the earlier cartridges.
* '''Ball, M2 alternate''' (''1943–1945''): A wartime economy variant of the ball M2 that used a steel full metal jacket coated with gilding metal to conserve copper and tin.
* '''Blank, M1906''': This cartridge is used to simulate rifle fire. It is derived from the M1903 blank, but with a resized neck. It has a paper bullet that contains a tiny black powder charge to aid in breaking it up. 
* '''Blank, M1909''': This cartridge is used to simulate rifle fire. The cartridge is identified by having no bullet, having a [[cannelure]] in the neck of the case, and the crimp is sealed by red lacquer. This is still a current cartridge for ceremonial M1 Garands. Modern M1909 blanks are rose-crimped, but they have the same designation.<ref>{{Cite web |url=http://www.ialegion.org/publications/M1_Garand_Manual.pdf |title=Instructional Guidance on the Operation and Maintenance of M1 Garand Rifle Firing the M1909 Blank Cartridge |access-date=2019-02-08 |archive-url=https://web.archive.org/web/20121107215347/http://www.ialegion.org/publications/M1_Garand_Manual.pdf |archive-date=2012-11-07 |url-status=dead}}.</ref>
[[File:FrankfordArsenalDrillRound.png|thumb|right| This dummy cartridge uses a modified case bearing the [[headstamp]] F A 4 09 indicating manufacture at Frankford Arsenal in April 1909. The case has been tin-plated, fluted with six longitudinal indentations, and perforated three times in alternating indentations. The hollow brass bullet retains a spring-loaded steel rod exposed in the primer pocket with 1/8-inch of possible forward movement when struck by the firing pin. This rod is intended for the Hollifield Target Practice Rod device -- a pointed rod within the barrel that would be propelled out of the barrel when struck by the steel rod in the dummy cartridge to prick a paper target held just in front of the rifle.<ref>{{cite web |url=http://cartridgecollectors.org/?page=introduction-to-30-06-cartridges |title=An Introduction to Collecting .30-06 Cartridges |last=Punnett |first=Chris |publisher=International Ammunition Association, Inc. |access-date=3 March 2018}}</ref>]]
* '''Dummy, M40''': This cartridge is used for training. The cartridge case has six longitudinal corrugations and there is no primer.
* '''Explosive, T99''': Development of a cartridge that contained a small explosive charge that more effectively marked its impact. Often referred to as an "observation explosive" cartridge, it was meant to designate line-of-sight targets for cannon. The T99 was never adopted.
* '''Frangible, T44/M22''' (''April 1945''): The bullet disintegrates upon striking a hard or armored target, leaving a pencil-like mark to indicate a hit during bomber aerial gunnery practice. The bullet is identified by a green tip over a white ring.
* '''Gallery practice M1919''' '''/''' '''Guard M1''': A reduced-charge Ball cartridge with a 140-grain wax-coated lead round-nosed bullet used for target shooting at indoor facilities or near built-up areas. It was later renamed the ''Guard M1'' in 1933 and was used for guard and sentry duty at defense plants and military installations during World War II. 
* '''Guard M1906''' (''1907–1918''): A reduced-charge ball cartridge with a 150-grain FMJ pointed-nose bullet used for guard and sentry duty in built-up areas. The cartridge was originally marked with six cannelures in the middle, but this weakened the case and caused it to burst in a dirty rifle. It was later marked by six dents or flutes on the shoulder of the cartridge. Although production stopped in 1918, there were plenty of stocks of the oddball round left until the 1920s. 
* '''High-pressure test, M1''': The cartridge is used to proof test 30-06 rifles and machine guns after manufacture, test, or repair. The cartridge is identified by stannic-stained (silvered) cartridge case loaded to a pressure of {{convert|60000|-|70000|psi|MPa|1|abbr=on}}.<ref>{{Cite web |date=2010-12-11 |title=US T24 machine gun (MG42) |url=https://www.forgottenweapons.com/light-machine-guns/us-t24-machine-gun-mg42/ |access-date=2023-02-11 |website=www.forgottenweapons.com |language=en-US}}</ref>
* '''Incendiary, M1917''': Early incendiary cartridge, bullet had a large cavity in the nose to allow the material to more easily shoot forward on impact. As a result, the M1917 had a tendency to expand on impact. The M1917 had a blackened tip.
* '''Incendiary, M1918''': Variant of the M1917 with a normal bullet profile to comply with [[Hague Conventions of 1899 and 1907#Hague Convention of 1899|international laws]] regarding open-tipped expanding bullets.
* '''Incendiary, M1''': This cartridge is used against unarmored, flammable targets. The tip of the bullet is painted blue.
* '''Match, M72''': This cartridge is used in marksmanship competitions, and can be identified by the word ''MATCH'' on the [[headstamp]]. Ammunition lots loaded for use in specific competitions have been headstamped NM (National Match), IM (International Match), PM or P ([[International Confederation of Fullbore Rifle Associations|Palma Match]]), and I & P (International and Palma Matches). 
* '''Rifle Grenade cartridge, VB''' (''?-1933''): These cartridges were designed to launch the [[VB rifle grenade|Viven-Bessières rifle grenade]]. The VB rifle grenade was initiated when a Ball bullet passed through it. The Rifle Grenade Cartridge had a wooden bullet so it could have a reduced danger space when fired. It was used with inert Training/Practice grenades at training ranges that were near built-up areas. It had a "VB" [[headstamp]] to indicate its use.   
* '''Rifle Grenade Cartridges, M1''' (''1933–1945''), '''M2''' (''1941''), '''M3''' (''1941–1953''), and '''M3E1''' (''1953–present''): These cartridges are used in conjunction with the M7 series of rifle grenade launchers to propel rifle grenades. Rifle grenade cartridges utilize a full-size brass case and carry only a powder charge.  M1, M2, and M3 grenade cartridges are sealed at the case-mouth with a red wad and the M3E1 is crimped.<ref>{{Cite web |title=An Introduction To Collecting .30-06 Cartridges - International Ammunition Association |url=http://cartridgecollectors.org/?page=introduction-to-30-06-cartridges |access-date=2023-02-11 |website=cartridgecollectors.org}}</ref> The differences between the three cartridges have to do with the powder charge and the range of grenade launchers. The M1 was a universal blank and rifle grenade cartridge that replaced the specialized rifle grenade (RG), chemical rifle grenade (CRG), and chemical warfare grenade (CWG) cartridges and was used with cup-discharger rifle grenade launchers. The M2 was an experimental cartridge used as a testbed; it used a propellant mixture of black powder and smokeless powder because it was feared that the smokeless powder would not reliably ignite by itself. The M3 was designed to be used with the M1 series (for the [[M1903 Springfield rifle]]), M2 series (for the [[M1917 Enfield rifle]]), and M7 series (for the [[M1 Garand rifle]]) [[M7 grenade launcher|spigot grenade launchers]] and used a propellant that was a mixture of five grains of FFFG black powder and 40 grains of IMR-4895 smokeless powder. The M3E1 featured an extended case neck, a rosepetal crimp, and a full smokeless powder loading and was designed for use with the [[M7 grenade launcher|M7A3 spigot rifle grenade launcher]] and larger [[ENERGA anti-tank rifle grenade|ENERGA rifle grenade]].<ref>{{cite web |url=http://www.inetres.com/gp/military/infantry/rifle/30_ammo.html |title=Gary's U.S. Infantry Weapons Reference Guide - .30 Caliber (.30-06 Springfield) Ammunition |access-date=2007-09-21 |archive-url=https://web.archive.org/web/20070927222232/http://www.inetres.com/gp/military/infantry/rifle/30_ammo.html |archive-date=27 September 2007<!--Added by DASHBot-->}}</ref><ref>{{cite web |url=http://cartridgecollectors.org/30-06intro/ |title=An Introduction to Collecting .30-06 |access-date=2007-09-21 |archive-url=https://web.archive.org/web/20070919235222/http://cartridgecollectors.org/30-06intro/ |archive-date=19 September 2007<!--Added by DASHBot-->}}</ref> The grenade cartridges were issued in double-rowed 10-round cartons, usually as part of a set with the hermetically-sealed metal M13 ''grenade launcher assortment'' ammo can.
* '''Tracer, M1''': Tracer for observing fire, signaling, target designation, and incendiary purposes. The M1 has a red tip.
* '''Tracer, M2''': Tracer for observing fire, signaling, target designation, and incendiary purposes. Has a short burn time. The M2 originally had a white tip, but then switched to a red tip like the M1. This was due to the similar purpose of both rounds. 
* '''Tracer, M2 alternate''' (''1943–1945''): A wartime economy variant of the tracer M2 that used a steel full metal jacket coated with gilding metal. It was ballistically matched to the ball M2 alternate.
* '''Tracer, T10/M25''': Improved tracer over M1 & M2. Designed to be less intense in terms of brightness than either the M1 or M2 tracers. The M25 had an orange tip.

===Commonwealth===
The .30-06 (or "caliber .30") cartridge was adopted in 1940 during the beginnings of the [[Lend-Lease|Lend-Lease program]] in anticipation of using American weapons in front-line service. The British used American-made ammunition during the war, which was designated as ''cartridge S.A, .30'' to avoid confusing it with their own [[.303 British]] service round. It was used after the war as belted machinegun ammunition by the Royal Armored Corps and was not declared obsolete until October, 1993. The "z" after the numeral indicates that it used a nitrocellulose propellant rather than cordite. Marks of ammunition were originally designated with Roman numerals (i.e., .303 Ball Mark VII), but were replaced with Arabic numerals by 1945 (i.e., .303 Ball MK 7).
* '''Cartridge S.A, .30 ball MK Iz''': This was the War Ministry's designation for the 172-grain .30-06 Ball M1 round. It was not accepted for use in service, as the American military had already marked it as limited standard. 
* '''Cartridge S.A, .30 ball MK IIz''': This was the War Ministry's designation for the 150-grain .30-06 Ball M2 round. Lend-Lease ammo made for the British government had no mark designation and was headstamped ''.300z''. 
* '''Cartridge S.A, .30 ball MK 3z''': This was the designation for an experimental round designed in 1945 for Royal Navy use that was based on the .30-06 ball M2. It was not adopted for service. 
* '''Cartridge S.A, .30 ball MK 4z''': This is a boat-tailed cartridge with a 150-grain full metal jacketed bullet. It is marked with a purple annulus. It was normally packed in 20-round cartons. However, Commonwealth countries that used the M1 Garand (like Pakistan) bundled it in 16-round cartons that contained two preloaded 8-round Mannlicher-style en-bloc clips.
* '''Cartridge S.A, .30 ball MK 5z''': This was made under contract by [[Fabrique Nationale]] in the 1970s. 
* '''Cartridge S.A, tracer .30 inch G Mark 1z''': This is a boat-tailed cartridge with a 150-grain full metal jacketed bullet and a Berdan primer. It is marked with a red annulus and has a [[headstamp]] of ''.30 G1z''.
* '''Cartridge S.A, tracer .30 inch G Mark 2z''': This was made under contract by Fabrique Nationale in the 1970s and is paired with .30 ball MK 5z. It is the same as the ''G Mark 1z'', except it has a non-corrosive Berdan primer. It is marked with a red bullet tip and has a [[headstamp]] of ''.30 G2z''.
* '''Cartridge S.A., incendiary .30 inch B Mark Iz''': US-made incendiary M1 cartridges.
* '''Cartridge S.A., incendiary .30 inch B Mark IIz''': UK-made incendiary M1 cartridges. 
* '''Cartridge S.A., drill .30 inch Mark I''': This was the War Ministry's designation for the US dummy M40 round. It had green paint on its flutes.
* '''Cartridge S.A., drill .30 inch Mark II''': US dummy M40 round made by the UK from used US .30-06 cases. It had a recapped [[headstamp]], ball or AP bullet over a wooden dowel, and red paint on its flutes.
* '''Cartridge S.A., drill .30 inch Mark III''': Training cartridge made by the Indian Army. Although described and specified in a 1945 ammunition manual, no copies have been discovered.
* '''Cartridge S.A., drill .30 inch Mark IV''':
* '''Cartridge S.A., drill .30 inch Mark 5''':

===French Union===
The .30-06 round was adopted in 1949 for use in American war surplus military aid weapons like the M1 Garand and M1919 medium machinegun. Military production was from the 1950s to the mid-1960s, while export production to French Union nations lasted until the late 1980s. Cartridge cases were softer than US specifications to prohibit their being recovered and reloaded by insurgents.  
* '''''7.62mm Modele 1949 Cartouche à Balle Ordinaire''''': This cartridge was based on the USGI .30-06 ball M2 (alternate) round. It had a cupro-nickel- or gilding-metal-clad steel jacket with either a brass or lacquered [[Parkerizing|Parkerized]] steel case with a Berdan primer.
* '''''7.62mm Modele 1951 Cartouche à blanc pour Fusil''''': This blank cartridge has a [[papier-mâché]] bullet for training use in rifles. The bullet is painted green to tell it apart from regular ammo.
* '''''7.62mm Modele 1951 Cartouche à blanc pour Fusil-Mitrailleur''''': This blank cartridge has a wooden bullet for training use in machineguns. The bullet is painted or tinted blue to tell it apart from regular ammo.
* '''''7.62mm Modele 1952 Cartouche à blanc''''': This blank cartridge has a lacquered Parkerized steel case and is sealed by a blue cardboard disc at the case mouth.

==Military firearms using the .30-06 cartridge==
{{Main article|List of .30-06 Springfield firearms}}
{{Unreferenced section|date=January 2021}}

[[File:Marineflametank1968.jpg|thumb|right|View from the turret of an [[M67 flame thrower tank|M67 "Zippo"]]. On the right is a mounted [[M1919 Browning machine gun]] with an attached box of linked .30-06 ammunition.]]

===Rifles===
*[[M1903 Springfield rifle|M1903/M1903A3]] bolt-action rifle using [[Mauser]]-licensed 5-round [[stripper clip]]s
*[[M1917 Enfield]] rifle: loading from 5-round Mauser-style stripper clips
*[[Itajuba Model 954 Mosquetao]]
*[[M1 Garand]]: loads by inserting an 8-round Mannlicher-type ''en bloc'' clip. The clip is ejected upon either firing the last round or pressing a release button on the magazine. 
*[[M1941 Johnson rifle]]: feeding from a 10-round internal rotary magazine, loading from 5-round stripper clips
*[[M1947 Johnson auto carbine]]
*[[Model 45A]]: prototype bullpup using 20-round M1918 BAR magazines
*Sheppard autorifle: prototype
*[[Sieg automatic rifle]]: prototype
*Springfield 1903 primer-actuated rifle
*[[Thompson Autorifle]]: prototype
*Thompson .30-06 submachine gun: prototype
*[[FN Model 1949]]

===Machine guns===
*[[Gatling gun]]: Some U.S. Gatling guns were re-chambered for .30-06
*[[Model 1909 machine rifle]]: The Benét–Mercié light machine gun was chambered for .30-06
*[[Chauchat|M1918 Chauchat]]: The US used a mix of Chauchats in .30-06 and 8&nbsp;mm Lebel
*[[Vickers machine gun]]
*[[Bren light machine gun|Breda Bren]]Johnston light machine gun
*[[Lewis gun]]: The US used a limited amount of Lewis guns chambered in .30-06 in both World War I and World War II
*FN Mle 1930: Used by Belgium in .30-06
*[[Johnston light machine gun]]
*[[M1917 Browning machine gun|M1917 machine gun]] water-cooled
*[[M1919 Browning machine gun|M1919 machine gun]], M37 machine gun, and AN/M2 aircraft machine gun. All air-cooled machine guns feeding from belts.
*[[M1918 Browning Automatic Rifle]]: loading from detachable 20-round magazines
*[[M1895 Colt–Browning machine gun#World War I|Marlin machine gun]]: Similar to the [[M1895 Colt–Browning machine gun|Colt–Browning machine gun]] ('Potato Digger'), but without the swinging 'digger' piston (linear gas-action piston replacing the swinging action), and used mainly on aircraft.
*[[M1941 Johnson machine gun|M1941 Johnson LMG]]: feeding from 20-round side-loading magazine.

==See also==
{{div col|colwidth=22em}}
* [[.303 British]]
* [[7.65x53mm Mauser]]
* [[7 mm caliber]]
* [[Caliber conversion sleeve]]
* [[Delta L problem]]
* [[.30-06 Springfield wildcat cartridges]] 
* [[List of rifle cartridges]]
* [[Sectional density]]
* [[Table of handgun and rifle cartridges]]
{{div col end}}

==References==
; Notes
{{Reflist|30em}}

; Bibliography
{{refbegin}}
* C.I.P. CD-ROM edition 2003
* C.I.P. decisions, texts and tables ([https://web.archive.org/web/20090620230409/http://www.cip-bp.org/index.php?id=tdcc-telechargement free current C.I.P. CD-ROM version download]) (ZIP and RAR format)
{{refend}}

== External links ==
{{Commons category-inline}}

{{.30-03 Springfield}}
{{WWIUSInfWeaponsNav}}
{{WWIIUSInfWeaponsNav}}
{{WWIIChineseInfantryWeapons}}

{{DEFAULTSORT:30-06 Springfield}}
[[Category:.30-06 Springfield firearms]]
[[Category:Weapons and ammunition introduced in 1906]]
[[Category:Military cartridges]]
[[Category:Pistol and rifle cartridges]]