Entry created
2025-06-29

Translation(s): none

DebianOn is an effort to document how to install, configure and use Debian on some specific hardware. Therefore potential buyers would know if that hardware is supported and owners would know how get the best out of that hardware.

The purpose is not to duplicate the Debian Official Documentation, but to document how to install Debian on some specific hardware.

If you need help to get Debian running on your hardware, please have a look at our user support channels where you may find specific channels (mailing list, IRC channel) dedicated to certain types of hardware.

Models covered
COMMERCIAL NAME

Sub-models (LIST OF MODEL REFERENCE NUMBER) options :
- Video card (Intel or ATI radeon or ATI FireGL) (adapt this list to actually match options available. Common features are listed below)
- Screen size (14", 15", or 15" wide)
- Wireless card
- Disk and Ram size, optical device
- Other options, like fingerprint reader, bluetooth...

Overall Status

Core Components

[ATTACH]

Boot Standard Kernel:

[Y]

LAN network card:

[Y]

Detect hard drives:

[Y]

Secure boot:

[?]

Extra Features

CPU Frequency Scaling

[Y]

Hibernation

[?]

Sleep / Suspend

[?]

Xorg

[?]

- OpenGL

[?]

- Resize-and-Rotate(randr)

[?]

Switch to External Screen

[?]

Mouse

- Built-in (Trackpoint)

[-]

- Built-in (Touchpad)

[-]

Modem

[-]

Wireless/Wifi

[-]

Keyboard's Hotkeys

[-]

Legend :
{OK} = OK ; {X} Unsupported(No Driver) ; /!\ = Error (Couldn't get it working); [?] Unknown, Not Test ; [-] Not-applicable
{i} = Configuration Required; X-( = Only works with a non-free driver and or firmware

Important Note

The Asustor Flashstor 6 FS6706T comes with an OS on a built in flash drive - I left this alone and installed debian on the ssd in the first slot. It has an HDMI output so I plugged in a monitor and did a standard usb stick install. I also replaced the original 4G of RAm with 32G of RAM and it seems to work fine.

Configuration

Display

Audio

Mouse

Power Management

WiFi

Modem

System Summary

lspci

$ lspci -nn

00:00.0 Host bridge [0600]: Intel Corporation Device [8086:4e24]
00:02.0 VGA compatible controller [0300]: Intel Corporation JasperLake [UHD Graphics] [8086:4e61] (rev 01)
00:04.0 Signal processing controller [1180]: Intel Corporation Dynamic Tuning service [8086:4e03]
00:05.0 Multimedia controller [0480]: Intel Corporation JasperLake IPU [8086:4e19]
00:08.0 System peripheral [0880]: Intel Corporation Device [8086:4e11]
00:14.0 USB controller [0c03]: Intel Corporation Jasper Lake USB 3.1 xHCI Host Controller [8086:4ded] (rev 01)
00:14.2 RAM memory [0500]: Intel Corporation Jasper Lake Shared SRAM [8086:4def] (rev 01)
00:15.0 Serial bus controller [0c80]: Intel Corporation Serial IO I2C Host Controller [8086:4de8] (rev 01)
00:15.2 Serial bus controller [0c80]: Intel Corporation Jasper Lake Serial IO I2C Host Controller [8086:4dea] (rev 01)
00:16.0 Communication controller [0780]: Intel Corporation Management Engine Interface [8086:4de0] (rev 01)
00:19.0 Serial bus controller [0c80]: Intel Corporation Jasper Lake Serial IO I2C Host Controller [8086:4dc5] (rev 01)
00:19.1 Serial bus controller [0c80]: Intel Corporation Jasper Lake Serial IO I2C Host Controller [8086:4dc6] (rev 01)
00:1a.0 SD Host controller [0805]: Intel Corporation Jasper Lake eMMC Controller [8086:4dc4] (rev 01)
00:1c.0 PCI bridge [0604]: Intel Corporation Jasper Lake PCIe Root Port [8086:4db8] (rev 01)
00:1c.1 PCI bridge [0604]: Intel Corporation Jasper Lake PCIe Root Port [8086:4db9] (rev 01)
00:1c.2 PCI bridge [0604]: Intel Corporation Device [8086:4dba] (rev 01)
00:1c.4 PCI bridge [0604]: Intel Corporation Jasper Lake PCIe Root Port [8086:4dbc] (rev 01)
00:1c.5 PCI bridge [0604]: Intel Corporation Device [8086:4dbd] (rev 01)
00:1c.6 PCI bridge [0604]: Intel Corporation Jasper Lake PCIe Root Port [8086:4dbe] (rev 01)
00:1c.7 PCI bridge [0604]: Intel Corporation Device [8086:4dbf] (rev 01)
00:1e.0 Communication controller [0780]: Intel Corporation Jasper Lake Serial IO UART Controller [8086:4da8] (rev 01)
00:1e.3 Serial bus controller [0c80]: Intel Corporation Jasper Lake Serial IO SPI Controller [8086:4dab] (rev 01)
00:1f.0 ISA bridge [0601]: Intel Corporation Jasper Lake eSPI Controller [8086:4d87] (rev 01)
00:1f.3 Audio device [0403]: Intel Corporation Jasper Lake HD Audio [8086:4dc8] (rev 01)
00:1f.4 SMBus [0c05]: Intel Corporation Jasper Lake SMBus [8086:4da3] (rev 01)
00:1f.5 Serial bus controller [0c80]: Intel Corporation Jasper Lake SPI Controller [8086:4da4] (rev 01)
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE Controller [10ec:8125] (rev 05)
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE Controller [10ec:8125] (rev 05)
03:00.0 Non-Volatile memory controller [0108]: Micron/Crucial Technology P3 Plus NVMe PCIe SSD (DRAM-less) [c0a9:5421] (rev 01)
04:00.0 Non-Volatile memory controller [0108]: Micron/Crucial Technology P2 NVMe PCIe SSD [c0a9:540a] (rev 01)
05:00.0 Non-Volatile memory controller [0108]: Micron Technology Inc 2550 NVMe SSD (DRAM-less) [1344:5416] (rev 01)
06:00.0 Non-Volatile memory controller [0108]: Micron/Crucial Technology P2 NVMe PCIe SSD [c0a9:540a] (rev 01)
07:00.0 Non-Volatile memory controller [0108]: Micron/Crucial Technology P2 NVMe PCIe SSD [c0a9:540a] (rev 01)

lsusb

$ lsusb

Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

$ sudo lsusb -v 2>/dev/null | grep -E '\<(^Bus|iProduct|bDeviceClass|bDeviceProtocol)'

Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
  bDeviceClass            9 Hub
  bDeviceProtocol         3 
  iProduct                2 xHCI Host Controller
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  bDeviceClass            9 Hub
  bDeviceProtocol         1 Single TT
  iProduct                2 xHCI Host Controller

USB Host controllers entries (without OHCI, UHCI, EHCI) are removed too.

Resources

Attachments

Some configuration files and sample outputs.

Other reports

Credits