Daimler V8 engines

V-8 engines were produced by the Daimler Company in displacements of Template:Convert (1959-1968) and Template:Convert (1959-1968). Designed for Daimler by Edward Turner, they were initially used in the SP250 sports car and the Majestic Major saloon respectively; ultimately, the 2.5 L was mostly used in the Daimler 2.5 V8 (later named V8-250) saloon made with Jaguar Mark 2 unit bodies from 1962 to 1969. Approximately 20,000 of the 2.5 L were used in the SP250 and the 250 saloon, and approximately 2,000 4.5 L in the Majestic Major saloon and its Daimler DR450 limousine variant which remained in production until 1968.

Design and development

Shortly after being appointed managing director (Chief Executive) of BSA's Automotive Division in 1956, Edward Turner was asked to design a saloon car powered by a V8 engine.Template:SfnTemplate:Sfn Turner and his design engineer Jack Wickes began considering the initial concept of their new engine by examining the manual and spare parts list of a Cadillac V8 engine, a 90° design with an L-head (sidevalve) introduced in 1914 and regarded as the first mass-produced V8. Using a pushrod overhead valve system kept down design, development and production costs and allowed Turner to base the design of the cylinder head on those he developed for Triumph motorcyclesTemplate:SfnTemplate:Sfn including the use of hemispherical combustion chambers.Template:Sfn Adapting the Triumph head design for use in a saloon car engine required much work in reducing friction and improving timing.Template:Sfn Much of the development of the prototype engine was carried out by Dr. J. N. H. Tait.Template:Sfn Tait had been involved with Donald Healey in the early post war years, working successfully on modified Riley 2½-litre Big Four engines, the final incarnation of which was used in 1953 Zethrin Rennsport prototype, delivering close to 200 bhp with surprising tractability.

Limited investment in tooling for the 2.5-litre engine led to limited production capacity, with a maximum weekly output of 140 engines, and the 4.5 litre was only ever made in small quantities. This prescribed maximum output was never achieved during the production of the engine.Template:Sfn

Specifications

The 90 degree V8 engine has a cast iron block, a short, stiff, dynamically balanced crankshaft carried on five bearings, light-alloy headsTemplate:Sfn with part-hemispherical combustion chambers, and two push-rod operated overhead valves per cylinder operated by a single chain-driven camshaft positioned centrally high up in the vee.Template:Sfn Other claims maintain the pistons are aluminium alloy pistons, the connecting rods steel, the block cast chrome-iron, and the heads a sand-cast high-tensile light alloy. The nose of the crankshaft carries a torsional vibration damper, a four or six-bladed fan, and the pulley for the triangulated thin belt drive for the dynamo and water pump.Template:Sfn The dynamo is located between the cylinder banks on the smaller 2.5.Template:Sfn At the rear the drive is taken from the back of the camshaft for the distributor positioned high above the unitTemplate:Sfn behind the two semi-downdraught SU carburettors.Template:Sfn There is a separate exhaust system for each bank of cylinders. Light alloy is used for the valve covers, tappet blocks, sump and inlet manifolds.Template:Sfn Cooling is by pump and fan with a thermostatic by-pass control.Template:Sfn

Applications

The engine first publicly appeared in the Daimler Dart but, after Chrysler objected to use of that name, it was called the Daimler SP250, a fibreglass bodied sports car aimed at the American market.

In December 1961 Daimler announced a marine version of their 2.5-litre V8.Template:SfnTemplate:Sfn

The 2.5-litre engine, only Template:Convert long and developing Template:Convert @ 5,800 rpm, gave better performance than Jaguar's own 2.4-litre DOHC in-line six, and after the 1960 merger the opportunity was taken to create an up-market Daimler V8 version of the Jaguar Mark 2. Between the years 1962 and 1969 17,620 Daimler/Jaguar V8s were built. Initially called the Daimler 2.5 V8, it was later called the Daimler V8-250.

The 4.5-litre engine was used in the Daimler Majestic Major DQ450, which is now rare, but was a respected high performance saloon in its day. The engine was also used in the Majestic Major's limousine derivative, the DR450. The 4.5-litre was tested in a Jaguar Mark X and there are some unauthenticated reports that this car lapped the Motor Industry Research Association's high-speed test track at Template:Convert but was reportedly not put into production precisely because its performance was better than the original 3.8 Mark X's.Template:Sfn However, the more likely explanation is that there was not the production capacity for the engine, and in any event the 4.2 litre mark X gave superior acceleration. All 4.5-litre V8 models sold were automatic, which makes connection to a manual transmission difficult.

Felday-Daimler hillclimbing special

Peter Westbury, an engineer from Surrey, England, competed in hillclimbing events in cars powered by Daimler V8 engines. Between the end of the 1962 RAC Hillclimb Championship season, in which he finished seventh in a V8-powered Cooper, and the beginning of the 1963 season, Westbury built a new hillclimbing special called the Felday-Daimler powered by a 2.5-litre Daimler V8 with a Template:Convert SU carburettor and a Roots supercharger. Westbury won the 1963 RAC Hillclimb Championship in the Felday-Daimler, setting course records at Craigantlet in Ulster and Dyrham Park in Gloucestershire.Template:SfnTemplate:Sfn

Glacier Grenade drag racing special

In 1970, Russ Carpenter and Tony Anderson built the "Glacier Grenade," a rear-engined dragster.Template:Sfn It was the first "All British" rear engined dragster of its type. Powered by a 2.5litre Daimler V8 it would compete in drag racing from March 1972 until 1989 when the car was outlawed from European racing. Russ began to drive the car in 1974 taking over sole driving duties after Tony's retirement from the sport in 1976 due to a spinal injury. Russ continued the car's development all the way through its racing life. In 1980 it became the first drag car under 5.5 litres, and the first all-British car to complete a quarter-mile race in less than eight seconds.Template:Sfn By the time of its retirement, the car, using mainly stock engine parts, produced 1400 bhp and ran the standing quarter mile in 7.2 seconds at 180 mph.Template:Sfn The car was restored and was to be displayed at Dunsfold Aerodrome near Guildford in April 2014.Template:Sfn

In 2014 Russ Carpenter was inducted into the British Drag Racing Hall of Fame for his development of this engine and influencing others to use a British engine in a largely American engine focused Motorsport.

End of production

Jaguar became part of the British Leyland Motor Corporation (BLMC) in 1968. BLMC chairman Sir Donald Stokes decided that the production costs of the Daimler V8 engine were too high and ordered its discontinuation.Template:Sfn The Majestic Major was discontinued without replacement in 1968, followed by the V8-250 in 1969.Template:Sfn By 1970 the Daimler range was reduced to the Jaguar XJ6-based Daimler Sovereign saloon and the Jaguar Mark X-based Daimler DS420 limousine, both powered by Jaguar XK engines.

Notes

Footnotes

Citations

References

• Autocar Road Test 1907, Autocar, 4 January 1963, Iliffe, Sons & Sturmey, London 1963

External links

• Template:Replace on YouTube – showing a running Daimler 2½-litre engine
• Template:Replace on YouTube – showing a running (and backfiring) Daimler 4½-litre engine